GM215 Firmware Update
DOWNLOAD FIRMWARE UPDATE
To update the firmware on the GM215, please download the file below (right click and select "Save target as..."):
DOWNLOAD DS30 BOOTLOADER GUI
Download the .exe file below and save it on your computer. Please make a note of the file location so you can find it in GeckoMotion during the next step.
FOLLOW BOOTLOADER INSTRUCTIONS
Once the above file is saved on your computer, please follow the instructions in the guide below:
This file is an “on the fly” file and will be posted on the Geckodrive website. Customers can download this file anytime or when they notice that there is new update available. After downloading this file, the customer can use the GeckoMotion GUI to open DS30 Loader GUI, select this file, and program this file to the GM215 PIC24.
DS30 GUI parameters:
The user should select the correct file which will be “pic24_update.hex” downloaded from the Geckodrive website.
Turn the DIP SWITCH (1-4) to ON ON ON ON position.
Press the “Write” button in the DS30 Loader, and when the DS30 is searching for the bootloader the user should press (but not hold) the reset button on the GM215 drive. Programming will be handled automatically from that point on.