Contact

Email Sales: [email protected]
Email Technical Support: [email protected]

Order Line: 714-832-8874
Fax: 714-832-8082

Mailing Address:
Geckodrive, Inc.
1540 South Grand Ave
Santa Ana, CA 92705

9 Comments

Ron Davis

March 27, 2015 at 11:53 pm

I see that the GN215 controller can run 4 axis' from the controller. I'm thinking that I would need 3 additional Digital Step Drives to accomplish this. Is that correct?

Reply ↓
Troy Sergeant

October 5, 2015 at 8:57 pm

Hi

i am looking at a project where i need a torque controlled drive.

At this stage i have a direction signal and a pwm torque signal. I need a max of 10 amps and about 100 volts but would like the ability to go to 150 volts if needed. It will be driving a stepper motor with an encoder. it will be low speed most of the time running stalled with a max of 100rpm but only for less than a 200 deg

are you able to help with this

cheers

Troy

Reply ↓
1. geckodrive
  
  January 4, 2016 at 8:25 pm
  
  Hi Troy,
  
  Unfortunately, we don't have a product that will fit those requirements. Please email [email protected] if you have any further technical questions.
  
  Reply ↓
steve

January 3, 2016 at 2:42 pm

Hi
I recently purchased a g540 from an Australian company, who supplied me with a 12 volt power supply. no matter what I have tried I can't get any movement from the steppers using mach 3.
Will it run on 12 volts and also do I still need resistors if I'm using these? GC-02 DB-9 Stepper Breakout Board

Reply ↓
1. geckodrive
  
  January 4, 2016 at 8:23 pm
  
  Hi Steve,
  
  That supply will not work with the G540 as it requires a minimum of 15VDC to operate. Please email [email protected] if you have any further technical questions.
  
  Thanks!
  
  Reply ↓
Nageswar

February 18, 2016 at 10:18 am

Any distributor in India??

Reply ↓
1. geckodrive
  
  February 19, 2016 at 5:58 pm
  
  Nageswar,
  
  At this time we do not have any distributors located in India. Please visit our distributor website page for a full list of our intentional distributors, http://www.geckodrive.com/international-distributors.html. Please contact us at [email protected] if you have any further questions.
  
  Kindly,
  Geckodrive, Inc.
  
  Reply ↓
R. W. (Bill) Hodgson

May 10, 2016 at 3:40 am

re-Representation in UK - local technical/product/application support

Sir,
Are you represented in the UK

STEP DESIGN Ltd. Are looking to represent a Stepper-Servo product manufacturer as GEKODrive with a view to providing local technical/product/application support, providing added value to our existing business

I this is of interest I should be happy to hear from you.

Please find as below my contact details:

Regards

R.W. (Bill) Hodgson
STEP DESIGN Ltd.
http://www.stepdesign.co.uk/
Tel. No. 01670 857906
Mobile: 07900 893293
Alt email: [email protected]
Twitter: @STEPDESIGNLtd

Reply ↓
1. geckodrive
  
  July 29, 2016 at 11:01 pm
  
  Hi Bill,
  
  We currently do have a UK distributor. Thank you for your interest!
  
  Reply ↓

Contact

9 Comments

Sign Up