The G214 is a powerful and cost effective FPGA based step motor drive meant for high power applications. Designed from the ground up to eliminate resonance from stepper motors, the G214 is in a class above competing products.
Proprietary resonance compensation ensures a step motor will move with maximum smoothness and minimum vibration. Using Geckodrive’s resolution upscaling at all speeds means motor smoothness is optimized at all resolutions and velocities. Every microstep is broken down into higher interpolated microsteps to compensate for motor vibration due to coarse microstepping at extremely low speeds. The resolution upscaling will change depending on the microstep resolution chosen via DIP switch to be sure your motor is getting the smoothest possible operation at all times.
Motor current can be set with a tri-mode option, using either an onboard DIP switch, external voltage or external resistor. The G214 can drive stepper motors ranging from NEMA 8 all the way up to NEMA 42. High speed morphing will get the most torque out of any stepper motor at high speed.
Allowing for drop-in replacement of IM483 and IM805 motor controls means technology upgrades are simple. Competitive pricing allows users to have the latest technology and the best motor performance for very little cost.
Check out Geckodrive G214 product today!