G340 Servo Drive

$158.00 As low as $111.00

Please note that this product has been placed on legacy status. This means that it is still manufactured but is not recommended for newer designs.

The only difference between a G340 and a G320 is the step pulse multiplier. This is only useful for high count encoders or low step pulse frequencies. The step pulse multiplier effectively acts as an encoder divider, dividing your encoder line count by 1, 2, 5, or 10. The COMMON input on the G340 is also user settable to be either COMMON ground or COMMON +5V as opposed to the default COMMON +5V on the G320. 

Buy 50 and above Contact for Quote

  • Buy 50 for $139.00 each and save 12%

Please note: The G340 is a legacy product and not recommended for new designs. It is still manufactured for existing applications and replacements.

The G320X is the latest revision of this drive.

More Information
Native Resolution Encoder Set, Step Pulse Multiplied
Power Rating 80VDC, 20A maximum
PWM Frequency 20kHz
Encoder Information Quadrature square wave, 5V <50mA
Motor Control Type N/A
Metal Treatment Black Anodizing
Write Your Own Review
You're reviewing:G340 Servo Drive