G901X Stepper Multiplier

$18.00 As low as $12.00

The G901X is a step pulse multiplier that is used to convert your G201X or G203V into a G210X or a G213V, respectively. It works by synthesizing a full step, half step, 5-microstep or 10-microstep pulse based on the jumper setting. This means the drive it is plugged into still has microstep smoothness with a selectable resolution.

  • Buy 50 for $17.46 each and save 3%

The G901X is a step pulse multiplier that is used to convert your G201X or G203V into a G210X or a G213V, respectively. It works by synthesizing a full step, half step, 5-microstep or 10-microstep pulse based on the jumper setting. This means the drive it is plugged into still has microstep smoothness with a selectable resolution.

For use with G201X and G203V drives

Allows your G201X or G203V to run in full-step, half-step, 5-Microstep, and 10-Microstep modes

Phase-locked loop pulse multiplier

Jumper settable resolution

Optoisolated step and direction inputs

Please note: The G901X will only work with the G201X and G203V; it is not a standalone product and will not work with any other stepper or servo drives.

More Information
Native Resolution N/A
Power Rating N/A
PWM Frequency N/A
Encoder Information N/A
Motor Control Type N/A
Metal Treatment Black Anodizing
Write Your Own Review
You're reviewing:G901X Stepper Multiplier