G901 Stepper Multiplier

The G901 is a step pulse multiplier that is used to convert your G201 into a G210. It works by synthesizing a full step, half step, 5-microstep or 10-microstep pulse based on the jumper setting; this means the drive it is plugged into still has microstep smoothness with a selectable resolution.

    For use with G201

    Allows your G201 to run in full-step, half-step, 5-Microstep, and 10-Microstep modes

    Phase-locked loop pulse multiplier

    Jumper settable resolution

    Optoisolated step and direction inputs

Please note: The G901 will only work with the G201; it is not a standalone product and will not work with any other stepper or servo drives.