The G723-280-4 is a NEMA 23 4-wire 1.8 degree stepper motor specifically meant for the G250, G251 and G540. Built in the USA to extremely demanding quality control specifications the G723-280-4 is the perfect balance between linearity and holding torque. The motor includes two 3.48K 1% resistors to get the best performance when using the G540, G250, or G251.

Holding Torque:             280 oz-in
Number of Wires:           4
Dimensions:                   3.1" (79mm) x 2.2" (56mm) x 2.2" (56mm)
Degrees Per Step:         1.8
Current Rating:               3.5A
Voltage Rating:               2.45V
Inductance Rating:         3.6mH
Resistance:                     0.7 ohms
Rotor Inertia:                    2.6 oz-in^2

Motor Datasheet and Wiring Information