Geckodrive

G340 Servo Drive

$158.00
  • Buy 10 for $152.00 each and save 4%
  • Buy 50 and above Contact for Quote
Country of Manufacture : United States

G340 Servo Drive

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Please note that this product has been placed on legacy status. This means that it is still manufactured but is not recommended for newer designs. It has been replaced by the drive below:

G320X DC Servo Drive

The only difference between a G340 and a G320 is the step pulse multiplier. This is only useful for high count encoders or low step pulse frequencies. The step pulse multiplier effectively acts as an encoder divider, dividing your encoder line count by 1, 2, 5, or 10. The COMMON input on the G340 is also user settable to be either COMMON ground or COMMON +5V as opposed to the default COMMON +5V on the G320. 


PHYSICAL AND ELECTRICAL RATINGS



Minimum

Maximum

Units

Supply Voltage

18

80

VDC

Motor Current

0

20

A

Power Dissipation

1

100

W

Temperature

0

70

°C

Humidity

0

95

%

Motor Inductance

1

50

mH

Input Frequency

0

200

kHz

Step Pulse “0” Time

2

 

uS

Step Pulse “1” Time

1

 

uS

Direction Setup

(Before step rising edge)

200

 

nS

Direction Setup

(Hold after pulse rising edge)

200

 

nS

Signal Voltage

4.5

5

VDC

Weight

3.6

 

oz

Encoder Supply Current

 

50

mA

Encoder Supply Voltage

 

5

VDC

 

G340 Manual

Related Application Notes:
    
Using HEDS Encoders With Geckodrive Servo Products

Returned Energy Dump Circuit

Electromechanical Emergency Stop

G340 Test Points (REV6 and higher)

You may also be interested in the following product(s)

G320X Digital Servo Drive

G320X Digital Servo Drive

$127.00